The RX FireFly is an air cooled small form factor UV-LED curing lamp with a 20mm x 20mm target spot size and a typical peak intesity greater than 1.5W/cm2. The RX FireFly product is ideal for small area and spot cure applictions in the UV curing of adhesives, inks, electronic materials and biomedical materials. RX FireFly Datasheet

The RX FireFly 4W is an air cooled high intensity UV light system with configurable emitting lengths up to 75mm and emitting width of 20mm. Industrial UV curing applications for printing, coatings and adhesives can now gain the proven advantages of high-intensity LED-based ultraviolet light. RX FireFly 4W Datasheet

The RX FireEdge is designed as a simple, low cost, small form factor air cooled UV-LED curing lamp for "pinning" applications where the requirement is to "freeze" the ink jet drop without fully curing. The first product of this family has a native emitting area of 75mm x 5mm but systems can be scaled linearly in 75mm increments without affecting pinning uniformity. RX FireEdge Datasheet

The RX StarFire is designed as a high intensity air cooled UV-LED curing lamp with configurable emitting lengths. The systems are currently available in standard lengths of 100mm or 150mm with an emitting width of 20mm. RX StarFire Datasheet

The RX FireJet is a high capability air cooled UV-LED curing lamp aimed primarily at UV Inkjet wide format systems and is capable of curing at the highest speeds for small, medium and grand format digital printing systems. It’s also ideal for many large single pass UV inkjet applications. RX FireJet is available in curing lengths of 75mm, 150mm and 225mm. RX FireJet Datasheet

The RX StarFire MAX is a water cooled high intensity UV curing lamp with configurable emitting lengths of 75mm, 150mm & 300mm with an emitting width of 20mm. The RX Starfire MAX continues the Phoseon tradition of innovation in bringing ever higher capability “industrial strength” UV solutions to market at competitive price levels. Like all RX Series products, the RX Starfire MAX utilizes Phoseon’s Semiconductor Light Matrix (SLM) technology which combines a dense array of light emitting semiconductor devices (UV-LED), with high tech micro optics and micro cooling in a cost-effective MOEMS (micro opto electro-mechanical system) package. RX StarFire MAX Datasheet

The RX FireFlex is designed as a scalable "high power" water cooled UV-LED curing lamp aimed primarily at high performance/high speed single pass UV inkjet applications but with utility in a wide variety of web/conveyor based UV curing applications. The initial product from the RX FireFlex family has an emitting area of 75mm x 50mm and is available in peak irradiances of 4W/cm2 or 8W/cm2 as measured at system output glass - which correlates to up to 72W/cm2 at the LED level. The RX FireFlex architecture is designed to allow the systems to be scalable in 75mm increments to as much as 2m in length with a variety of peak irradiance and total UV power specifications based on customer and application needs. RX FireFlex Datasheet

The FireLine is a scalable water cooled UV LED curing lamp with uses in a wide variety of web/conveyor based UV curing applications. The FireLine architecture is designed to allow the systems to be scalable up to 2m in length. FireLine Datasheet

RX FirePower is a water cooled curing lamp specifically designed to address the needs of UV-LED curing in the printing press market where total UV power delivered is a key parameter based on high speed printing requirements. With a range of curing lengths available for all major press sizes the FirePower family offers industry leading UV curing power in a compact mechanical package and an intelligent and innovative electronic control capability. FirePower will be tailored both for narrow web presses and wide web sheetfed presses. RX FirePower Datasheet