Novagard RTV 200 Series
Self-leveling, single-component, oxime-cure silicones for use in applications where the coating needs to flow into small crevices and hard to reach areas. Coating intricate electrical and mechanical devices, insulating electrical terminals, and thin section potting are a few of the many applications in which RTV 200 Series products may be used. These products have good adhesion to most common substrates, and will not corrode aluminum, copper and ferrous metals.

Novagard RTV 400 Series
The Novagard RTV 400 Series is composed of single-component, moisture-curing, thixotropic paste products that cure to low to medium modulus, rubber-like solids. The cure mechanism is neutral (oxime) which is non-corrosive to metal substrates such as copper, aluminum and ferrous metals. This series has excellent adhesion to many substrates including metals, plastic and woods. Typical applications include bonding automotive trim, headlight assemblies, plastic vent pipes, and fiber optic lighting. Sealing and gasketing applications include electrical and electronic equipment, cement and masonry and any area where the weather and environment needs to be sealed out. The Novagard RTV 400 Series also includes two low-adhesion products for creating formed-in-placed gaskets where postproduction disassembly is required.

At Novagard Solutions, we specialize in the customized formulation of single-component, neutral-cure, oxime silicone RTVs (room temperature vulcanates) for a variety of industrial applications. These silicone products are scientifically formulated to meet customer specified performance requirements. Novagard Process Specialists, working in conjunction with your representatives, will manufacture sealants, adhesives and coatings with tailored rheological properties, cure profiles, adhesion characteristics and physical properties to match your application needs and specifications. Silicone RTVs react with atmospheric moisture under standard operating conditions to produce an elastomeric network. Novagard silicone RTVs exhibit the following attributes:

• Long service-life with excellent weathering and oxidation resistance
• Ease of installation, "ready-to-use" products
• Primerless adhesion to most common substrates
• Broad operating temperature range (−40°C to 204°C)
• Rapid cure with exceptional green-strength for quick turn around
• Low odor, and solvent free with no isocyanates

Silicone Grease and Compounds
Silicone Grease and Compounds: By combining silicone-lubricating fluids with various thickeners, grease and grease-like compounds with unique physical properties and performance characteristics are created. Novagard is a leading manufacturer of these silicone greases and compounds, which are ideally suited for use in hostile environments and critical lubrication applications. Under most circumstances, silicone based products provide for a longer service life than many other materials currently available.

Solar Photovoltaic Assembly Silicone
Solar Photovoltaic Assembly Silicone : Novagard Solutions™ offer a broad range of silicone based materials to best meet the specific needs of solar photovoltaic module assembly.

Conformal Coating UV Silicone
Conformal coatings provide protection for printed circuit boards and other sensitive electronic components. Generally applied in thin films, these silicone-based materials are particularly useful for protecting circuitry in harsh environments and severe service conditions.

UV Silicone Fabric Coatings
The unique physical properties of silicone based coatings can provide a variety of functional benefits to an assortment of apparel items. Incorporating a silicone coating, or anti-slip strip, will add value to your garment and UV-cured products from NOVAGARD® Silicones process extremely fast and do not require added heat.

Potting and Encapsulating UV Cure Silicone
Eliminate mixing of two-component materials and oven cure cycles by using UV cured potting and encapsulating compounds from NOVAGARD® Silicones to safeguard delicate electronic elements.

Pin Connector Potting UV Silicone
Leak prevention, water repellency and weather resistance are absolutely essential to provide long-term durability of pin connector assemblies in exposed conditions. Count on NOVAGARD® Silicones UV cured potting compounds to contribute high performance and reliable protection to extend your product life-cycle.

Printed Electronics UV Cure Silicone
Flexible and printed electronics (FPE) incorporates several new technologies and emerging processes and materials across a variety of applications. FPE may be twisted, bent or shaped without damage enabling endless innovation and unlimited possibilities.

RFI and EMI Shielding using UV Cure Silicone
NOVAGARD® Silicones UV cured shielding compounds provide the long-term, reliable protection and durable barrier properties necessary to safeguard sensitive electronic circuitry and components in even the most severe environments.

Novagard RTV 200 Series

Self-leveling, single-component, oxime-cure silicones for use in applications where the coating needs to flow into small crevices and hard to reach areas. Coating intricate electrical and mechanical devices, insulating electrical terminals, and thin section potting are a few of the many applications in which RTV 200 Series products may be used. These products have good adhesion to most common substrates, and will not corrode aluminum, copper and ferrous metals.

RTV 200 Series -- Coatings and Encapsulants

Description	Technical Data Sheet
200-107 Blue White Coating	200-107
200-202 Coating	200-202
200-250 Translucent Coating	200-250
200-251 Translucent Coating	200-251
200-255 Coating	200-255
200-257 Translucent Coating	200-257
200-260 Coating	200-260
200-306 Red High Temp Coating	200-306
200-465 Coating	200-465

Novagard RTV 400 Series

Novagard RTV 400 Series
The Novagard RTV 400 Series is composed of single-component, moisture-curing, thixotropic paste products that cure to low to medium modulus, rubber-like solids. The cure mechanism is neutral (oxime) which is non-corrosive to metal substrates such as copper, aluminum and ferrous metals. This series has excellent adhesion to many substrates including metals, plastic and woods. Typical applications include bonding automotive trim, headlight assemblies, plastic vent pipes, and fiber optic lighting. Sealing and gasketing applications include electrical and electronic equipment, cement and masonry and any area where the weather and environment needs to be sealed out. The Novagard RTV 400 Series also includes two low-adhesion products for creating formed-in-placed gaskets where postproduction disassembly is required.

Silicone Greases and Compounds

• Excellent oxidation resistance and thermal stability
• Superior hydrolytic stability and water washout resistance
• Broad operating temperature range (−56°C to 204°C)
• Exceptional release properties and good lubricity
• Excellent dielectric properties, corrosion protection and viscosity stability
• Chemically inert and compatible with a wide range of substrates

Rubber and Plastic Lubricants	Excellent resistance to moisture, corrosion and oxidation while exhibiting wide temperature ranges -55°C to 150°C. Conformance to SAE and Military specifications.
Dielectric Silicone Grease Compounds	Outstanding water repellence while hydrolytically stable with low toxicity. Wide temperature ranges of -57°C to 204°C.
NSF Standard 61 Lubricant Silicone Grease	Ideal for valve and O-ring lubrication with excellent vacuum capabilities and outstanding water resistance. Certified to NSF Standard 61 for Drinking Water System Components.
High Voltage Silicone Grease Compounds	Ideal for high voltage insulators to prevent flashover in addition to being an excellent dielectric and water repellent. Provides good adherence while chemically inactive with low toxicity.
Thermally Conductive Silicone Grease Compounds	Ideal for thermocouple wells, power diodes, transistors, semiconductors and ballasts. Excellent heat transfer compound for electrical and electronic industries, with outstanding long-term storage stability without oil separation.
Novagard Versilube® Lubricants	These lithium soap thickened greases designed for metal to metal and non-metallic applications to reduce friction and wear under heavy loads, slow speeds, extreme temperature and variable environmental conditions. They are ideal lubricants for applications requiring extended service intervals.

NOVAGARD Silicones UV cured inks and coatings maintain all of the enhanced performance characteristics of conventional silicone based materials with processing speeds unmatched by other technologies. Based on patented, ultraviolet-energy cure chemistry exclusively available from NOVAGARD Silicones, the 800 Series products possess a speed and depth of cure far exceeding most other UV cure systems. This unique chemistry allows deep sections to cure almost instantly. If desired, a moisture curable component provides for shadow curing in those areas unexposed to the ultraviolet light source.

Silicone Properties with UV Speed

• Adhesion to most common substrates including plastics and metals
• Excellent thermal stability and weather resistance
• Transparent/translucent systems as well as highly pigmented formulations
• Dielectric properties expected from a silicone
• Unique, all new patented UV-cure chemistry (U.S. Pat. No. 7,105,584)
• Solvent Free / 100% solids – no VOCs to handle or report
• Extremely flexible, high elasticity with a soft touch and no tackiness
• Service Temperature of −54°C to 260°C