Gentec Benelux is a solutions provider addressing problems related to precision assembly, adhesives, encapsulants, coatings, UV curing and UV light measurement for a wide range of industries. With over 20 years of experience, Gentec is supplying quality equipment and materials to an ever growing number of industrial clients in Belgium, The Netherlands and Luxembourg.

	EpoTek is one of the leading manufacturers of specialty adhesives for use in advanced technology applications.		Novagard Solutions manufactures specialty silicone lubricants, grease, adhesives and sealants.
	Lumen Dynamics (formerly EXFO) supplies Omnicure UV Spot Curing equipment as well as UV LED sources.		EIT UV radiometers and on-line UV monitoring equipment.
	Norland Optical and Electronic Adhesives provide fast, precision bonding and simplify processes requiring critical alignment.		Cyanoacrylates, Anaerobic adhesives, UV curable adhesives etc.
	UV LED arrays - air cooled or water cooled systems.		Resoltech manufactures resin systems for laminates, composites, coatings and castings.
	Mixing, dispersing, bubble removal of epoxy, silicones, conductive pastes, medicines, chemical materials, etc.		Volumetric "air-free" dispensers from Fishman, Semco Cartidges, Graco Mixing Metering, Cox Applicators, Janome Robotics etc.

Since 1988, Gentec has offered adhesives and equipment of the highest quality. In the Gentec applications lab, we use Omnicure technology together with adhesives from EpoTek, Norland and Cyberbond to evaluate potential bonding solutions. By combining our years of experience, our in-depth understanding of UV curable adhesives and the Omnicure Spot-Curing equipment, Gentec strives to provide elegant bonding solutions without delay.

More Information?

Epoxy Technology is one of the leading manufacturers of specialty adhesives for use in advanced technology applications. The worlds’ most important companies in the electronics, medical device, semiconductor and fiber optics industries rely on Epoxy Technology’s products for their superior quality and performance. With more than 20 years of experience, Gentec helps customers in Belgium, The Netherlands and Luxembourg make the best choice.

More information?

Résoltech is a European manufacturer of epoxies for laminates, composites and castings. In addition Résoltech has developped a non-toxic water-based epoxy for wood and floor coatings, as well as coatings for tanks, pipes and swimming pools. Gentec helps you make the choice.

	Norland UV cured optical adhesives (NOA) are used for lens bonding and many other applications. Norland Electronic grade adhesives (NEA) cure with UV and heat. Norland UV cured adhesives are acrylates with a unique structure.
	EpoTek UV cure epoxies are single component that are stable at room temperature. Curing begins when exposed to UV light. Unlike acrylates, curing will continue after UV exposure.
	UV curable adhesives from Cyberbond include acrylates, epoxies and UV-anaerobic curing acrylates.
	NOVAGARD Silicones UV cured inks, coatings and encapsulants maintain all of the enhanced performance characteristics of conventional silicone based materials with processing speeds unmatched by other technologies.

	KLEIBERIT is committed to continuous innovation and quality and has over 35 years experience specialising in the manufacture of polyurethane adhesives. KLEIBERIT continues to invest in equipment to enable the develpoment of new high performance products.
	Novagard Solutions manufactures specialty silicone lubricants, greases, adhesives, sealants, gels and UV / Dual Cure encapsulants.
	Cyberbond is a TS 16949:2002(E) and ISO 9001:2000 certified company specializing in the manufacture of industrial adhesives such as: Cyanoacrylates Anaerobics UV/light curable corresponding Activators, Primers, Removers adequate Dosing Equipment and dosing aids

	The Omnicure Platform, toghether with a wide range of light guides and optical accessories, offers power and versatility in UV Spot Curing applications. Lumen Dynamic's (previously EXFO) proprietary Closed-Loop Feedback (CLF) technology is found exclusively in the OmniCure® S2000 UV spot curing system. It enables manufacturing process engineers to design UV curing assembly processes with higher yields on medical and high technological devices while saving on UV calibration costs..
	The The OmniCure® LX400 LED UV Spot Curing System utilizes the highest power and most reliable LED technology in the smallest form factor currently available. Control up to four UV LED Heads independently or simultaneously via Foot Pedals or PLC inputs. Each head can be set for different exposure times and irradiance levels in 1% increments. Three different wavelengths available (365nm, 385nm, 400nm) for greater compatibility with current adhesives.
	The RX Starfire MAX system is a high intensity water cooled UV light “bar” with configurable emitting lengths of 75, 150 or 300mm with an emitting width of 20mm.   The RX Starfire MAX is suitable for a wide variety of applications including inkjet and coatings markets and can be easily integrated into production systems. (spectral output: 4 watts/cm² at 395nm standard or optional 365nm) see the full range of LED Curing products
	UV-Quickstart lamps can be switched off and on at any time as needed. The Quickstart technology makes shutters absolete while reducing power consuption. Full UV power is reached within a few seconds.

UV Measurements

UV Radiometers and On-Line UV Monitors

Calibrated UV Radiometers	UV On-Line sensors
(quantitative measurement)	(relative measurment)
Power Puck II 4-channel integrating radiometer	Compact Sensor (UVA, UVB, UVC or UVV)
PowerMap 4-channel profiling radiometer	MultiBrite (controls 4 compact sensors)
MicroCure (smallest UVA radiometer)	Display Panel (control and display 1 compact sensor)
3D Radiometer system (up to 32 radiometers)	DIN Rail compact sensor controller

UV radiometers are calibrated instruments that measure UV energy in relation to a standard UV source. On-Line monitoring instruments are not calibrated... they indicate UV energy relative to a user-defined benchmark.

Get more information

			The Thinky ARE-250 can be used for mixing and/or bubble removal of not only epoxy but also silicones, conductive pastes, medicines, chemical materials, etc.. The ARV-310 does it all with a programable level of vaccuum. The ARV-930TWIN can mix batches up to 1 liter together with a programable level of vaccuum. The ARV-5000 can mix batches up to 4.7 kg together with a programable level of vaccuum. The Thinky SR-500 is designed for mixing of solder pastes and other high density materials. The Thinky ARC-40 is designed to help you fill syringes without air bubble iclusions.
start	30 seconds
2 minutes	7 minutes
Get more information			Mixing - Milling - Dispersion - Defoaming

POLY DISPENSING SYSTEMS
Discover the complete line of industrial dispensing solutions offered by Gentec and PDS.